POS-Line High Bright IQ Core™-i5
37
Mounting and dismounting the PC box
Note: The display must be switched off before dismounting or mounting the PC box. Not confirming to the rules may electron
-
ically damage the display and the PC box.
Note: The two interfaces on the POS-Line High Bright monitor may only be used for the PC-Box (option). Other uses are not
permitted, otherwise they could damage the device.
To remove the PC box please proceed as follows:
•
Make sure that the display is completely disconnected from power. Unplug the power cable or switch the monitor off with the main
power on/off switch.
•
Remove the safety screw (1) from the PC box .
•
Pull carefully at the handle of the PC box (2) and lift the PC box back away.
To mount the PC-box please proceed as follows:
•
Make sure that the display is completely disconnected from power. Unplug the power cable or switch the monitor off with the main
power on/off switch.
•
Place the PC box on the display module. Make sure that the guide pins on the box dive into the round openings of the display
module.
•
Slide the PC box inward so that the connectors fully engage.
•
Fix the PC box with the locking screw (1).
(2)
(1)
