DS-MPE-CAN2L User Manual Rev A.1
www.diamondsystems.com
Page 27
10.5
Writing a Message
To write a message on a CAN port, define the CAN message by entering the desired data into the Data (Hex)
fields. Then click on
“Write Message”
as shown in the below figure.
To transmit a different CAN ID, change data in the CAN ID field, enter the desired data into the Data (Hex) fields,
and click on “
Write Message
”.
To change the message length, change the CAN message length to the new length, enter the desired data into
the Data (Hex) fields, and click on “
Write Message
”.
To transmit a different CAN message to the same CAN ID, change the CAN message to the desired data, and
click on “
Write Message
”.
Summary of Contents for Diamond Systems DS-MPE-CAN2L
Page 1: ......
