manualshive.com logo in svg

Forte Duplicator, User Manual

Share
Download
Forte Duplicator User Manual Download Page 12

7  

 

7. Select Source 

page 24  

Use the Select Source menu or the Source quick key to tell the system where the content 
of the master disc resides during duplication. At this point, Hard Drive is the only option in 
this setting since it is the only place where the content of the master disc resides during 
duplication.   

8. Master Mode 

page 24  

Use the Master Mode menu to select either Single Master Mode(SM) or Multi Master 
Mode (MM). For more information on these modes, see  Single Master and Multi Master 
Modes  on page 13.   

9. Erase 

page 24  

Use the Erase menu to erase your Rewritable discs. There are two options:   

 

Full Erase: This option erases the entire disc, destroying all previously written data in 
the process.  

 

Quick Erase: This option erases the index (TOC) of the Rewritable disc, not the data 
section. It is much faster than Full Erase. However, the data section is still recoverable. 
If you prefer the old content not be recovered for security purposes, please perform 
Full Erase.  

10. Hard Drive Setup 

page 25  

Use the Hard Drive Setup menu to perform various hard drive-related operations. These 
options include loading, renaming, or deleting your images.   

11. Setup 

page 28 

Use the Setup menu options to control how the autoloader operates. You can scroll 
between the various options using the  Up or 

 

Down button.   

1.  Language  

Use this setting to choose the language used to navigate the autoloader. The 
autoloader officially supports English and Spanish menus. More languages could 
be added.  

2. Read Error Skip  

Normally, when the autoloader encounters a read error while reading the master 
disc, all the duplication will be aborted and all the recordable media in the writers 
will be ruined. However, if you believe that your master disc has a small, 
insignificant error due to physical damage, you can utilize this setting to allow the 
autoloader to skip any read errors that it encounters. It is  Off with Retry

 

by 

default.  

Important: When this function is  ON , it does not fix the error; it only skips it to 
continue copying the rest of the readable data. This is recommended for Video and 
Audio duplication purposes.  

3. CD Writing Mode  

Use this setting to select the mode you would like use to duplicate a CD. There are 
two different modes:  Disc at Once  and  Track at Once.  Unless you understand 
completely what they mean, we strongly suggest you to set it as  Disc at Once .   

4. Max Audio, VCD & CDG Speed  

Summary of Contents for Duplicator





















































Reviews:

No comments

Brands by name

Popular brands

Load more brands