There are 2 ways to connect the ECSPHB to the
Cli App.
EZ Mode and AP Mode.
AP mode is for use if EZ Mode has failed.
AP Mode
Step 1
Turn off the Hub before this operation, press and hold the
“Connection” button, and then turn on the device, until 1 beep
is heard and the Blue LED is flashing.
Your Hub is now in AP Connection Mode.
Step 2
On the “Cli” App, press Add “+”, “ESP”,
“Smart Alarm Hub with Backup Battery”.
Step 3
Choose “AP Mode”
Step 4
Enter the Wi-Fi password of the router which the Hub will be
connected to.
Step 5
In the phones Wi-Fi settings, choose “SmartLife_xxxx”
and connect. Once connnected, return to the “Cli” app
Step 6
Now you can set the alarm name to finalise the device.
Installation
