Make sure that carpets do not
stop the air circulation below
the appliance.
Make sure that the appliance
does not touch the wall or other
units.
2. Loosen or tighten the feet to adjust the
level.
WARNING! Do not put
cardboard, wood or equivalent
materials below the appliance
feet to adjust the level.
x4
The appliance must be level and stable.
A correct adjustment of the
appliance level prevents the
vibration, noise and the
movement of the appliance
when in operation.
The inlet hose
1. Connect the water inlet hose to the
back of the appliance.
2. Position it toward left or right
depending on the position of the water
tap.
20
O
20
O
45
O
45
O
Make sure that the inlet hose is
not in vertical position.
3. If necessary, loose the ring nut to set it
in the correct position.
4. Connect the water inlet hose to the
cold water tap with 3/4" thread.
CAUTION! Make sure that
there are no leaks from the
couplings.
Do not use an extension hose if
the inlet hose is too short.
Contact the service centre for
the replacement of the inlet
hose.
Water-stop device
The inlet hose has a water stop device.
This device prevents water leaks in the
hose because of its natural ageing.
7