18
FØRO PH13000 - MANUAL
EN
Step 7: Carefully install the glass tube (C) by
lifting it up and inserting it through the center
hole in the top plate assy (B). Make sure the
metal clips that are inside the cylinder of the
top plate assy (B) are outside the glass tube
(C). Also ensure that the black silicone ring
(F) is attached to the lower edge of the glass
tube (C) as illustrated. Let the bottom of the
glass tube rest on the middle plate (J) with the
silicone ring (F) in between. Make sure that
the glass tube (C) is positioned properly and
is completely covering the center hole of the
middle plate (J).
Alternatively, you can also place the silicone
ring (F) onto the middle plate (J) prior to
installing the glass tube.Ensure the rim of the
glass tube f its f irmly in the silicone ring.
WARNING! The black silicone ring must be in
place prior to operating the heater.
Step 8: Assemble the protective guards (E) by
hanging the 6 hooks into the 6 holes of the
upper support legs (D).
Secure the protective guards (E) by screwing
the 4 f ixing brackes (GG) in place using 4
screws (3/16” - DD).
