background image

Electrical Installation

8

Insert the 3-piece male connector from 

the Down Rod to receiver’s 3-piece 

female connector.  Make sure the Red

wire aligns with the Red wire, the 

Brown with the Brown and the Yellow 

with the Yellow.  Then insert the 2-piece 

male connector from the Down Rod to 

receiver’s 2-piece female connector 

aligning White with White and Black 

with Black. 
Using the wire connectors:
1. Connect the L (Black) wire from your 

Receiver to the Live (Black) wire from 

your ceiling electric box.

2. Connect the N (White) wire from your 

receiver to the Neutral (White) wire 

from your ceiling electric box.

3. Connect the green Ground wire that 

comes from the Ball of the Down Rod 

to the Green wire that comes from 

your receiver, the green wire from 

your bracket and to the green wire (if 

there is one) that comes from your 

box and at the same time to the bare 

or green wire that comes from your 

electric supply wire bundle.

Gently insert the receiver into the Mounting Bracket with the flat part 

towards the top.  Carefully push wires and wire connectors into the 

electric box leaving the antenna outside of the Mounting Bracket.
Spliced conductors should be turned upward and pushed carefully up 

into outlet box. The wires should be spread apart with the grounded 

conductor and the equipment-grounding conductor on one side of the 

outlet box. 

Antenna

Replacing the Canopy

Lift canopy to Mounting Bracket and align slotted holes in canopy 
with loosened screws in Mounting Bracket.  Twist canopy to lock.  
Tighten all canopy mounting screws securely.  Ensure that wires 
have not been compressed by the canopy.

White Supply Wire

Ground

(green or

bare)

Ground

(green or

bare)

Green Ground

Receiver

White

AC IN N

White

Black

Black

AC IN L

Black Supply Wire

From Receiver

From Receiver

From Ceiling

From Ceiling

Male Connectors

from Down Rod

    !      

WARNING:  Failure to disconnect 

power supply to the box may result in 

serious injury.  Double check now that 

the circuit breakers to the box are off.

Wrap each wire connector with

Electrical Tape for extra safety

*

*

Summary of Contents for Voce CF01566





















Reviews: