background image

                                                                                                                                              

    EN 

 

 

D. If the unit is not stable, pull out the appliance and repeat the previous step until the unit is stable. 

Note:

 If the unit is relocated, the bracket must be removed and installed in the new location. 

 

Installing Your Freezer 

  This

 

refrigerator is designed to be free standing only.

 

  Allow a minimum of  2 inches at the back, 0.8 inches at each sides and 3.5 inches on top to for proper 

air ventilation. Adjust the feet to keep the refrigerator level. 

  Locate the refrigerator  away from direct sunlight and sources of heat (stove, heater, radiator, etc.). 

Direct sunlight may affect the acrylic coating and heat sources may increase electrical consumption.  

Ambient temperature below 50°F (10°C) or above 85°F (29°C) will hinder the performance of this 

appliance.  

This unit is not designed for use in a garage or any other outside installation. 

  Avoid locating the refrigerator in moist areas.  

  Plug the refrigerator  into dedicated, properly installed-grounded wall outlet. Do not under any 

circumstances cut or remove the third (ground) prong from the power cord. Any questions concerning 

power and/or grounding should be directed toward a certified electrician or an authorized service 

center.  

This unit is not designed to be installed in an RV or used with an inverter. 

  After plugging the refrigerator into a wall outlet, turn the unit on and allow the unit to cool down for 3 ~ 

4 hours under before placing food in the appliance. 

 

This appliance is intended to be used in household and similar applications such as

 

staff kitchen areas in shops, offices and other working environments; 

farm houses and by clients in hotels, motels and other residential type environments; 

bed and breakfast type environments; 

catering and similar non-retail applications.

 

 

Electrical Connection 

 

 

WARNING

 

Improper use of the grounded plug can result in the risk of electrical shock. If the 

power cord is damaged,it must be replaced the manufacturer,its services agent or 

similarly qualified persons in order to avoid a hazard.

 

 

 

This refrigerator should be properly grounded for your safety.  The power cord of this refrigerator is 

Push the appliance into  

its place of installation.

 

Summary of Contents for FDRBI1876-30S














Reviews: