3
3. Turning the power ON
1. Con
fi
rm that the power switch is turned off.
2. Securely connect the female plug of the power
cord that came with the
FD 574
to the inlet.
3. Insert the male plug of the power cord into the
outlet (three-slot).
U80033
U80021
Female plug
of the power
cord
Inlet
Outlet
Male plug of
the power
supply cord
●
Insert the power cord plug
fi
rmly into the
socket, so that proper electrical contact is
effected. If grounding is imperfect and
electrical leakage occurs,
fi
re or electric
shock could result.
WARNING
WARNING
NOTE
When installing an optional unit, complete the
main unit installation and make sure that the ma-
chine operates normally before installation.
Refer to the Installation Manual of each optional
unit for installation.
4. Confirm that the plugs in steps 2 and 3 are se-
curely inserted.
●
Connect the machine to an outlet pro-
viding a 60Hz, 15A power supply of
at least 120V.
●
Insert the power cord’s plug correctly
into the outlet, so that electrical con-
nection is effected completely.
●
Position the machine close to the pow-
er outlet. Do not connect multiple loads
to a single outlet. If an extension cord
is necessary: Extension cord should
be of at least 130V, 15A speci
fi
cation,
conforming to standard, and not ex-
ceed 5 m in length.
●
The power cord should never be
stepped on, or crushed between ob-
jects. If it is, accidents could result.
Male plug of
the power
cord
