5
DAILY MAINTENANCE
1. It is recommended to let forms cool for one-half hour, from the laser printer, before folding and seal-
ing. This allows toner to set on the forms, and static electricity to discharge. A 402 Series Jogger is
recommended for best results. The Jogger squares the forms and dissipates heat and static electricity
created by laser printers.
2. If toner builds up on the metal sealer rollers, clean the rollers with a lint-free cloth dampened spar-
ingly with a mild household cleaner.
3. Clean in-feed wheels and fold rollers with Formax-recommended roller cleaner & rejuvenator (Formax
part #203) to remove paper dust and toner. A damp cloth with water is the best alternative.
CAUTION:
Do not use any chemicals other than the roller cleaner & rejuvenator or water.
TROUBLESHOOTING
A. Clearing Paper Jams:
WARNING: Turn machine off and unplug cord from its receptacle.
1. If a jam occurs between the metal rollers remove any remaining forms from the hopper.
2. Open the top cover and remove the upper fold plate.
3. Remove the jam clearing handle (located under the upper fold table), apply the handle to the upper
metal roller (figure 6) and turn clockwise until the paper jam is clear. NOTE: Do not turn the roller
counter-clockwise to force the forms to exit: rollers may be damaged.
4. Remove the damaged form, return tool to holder and reinstall upper fold plate.
5. Reinstall cover and press the black reset button (figure 7).
If a jam occurs in the fold plates, remove fold plate and remove paper. Reinstall fold plate.
Figure 6
Figure 7
Breaker reset
