background image

TROUBLESHOOTING 

Refer to the “Troubleshooting Section” of the operator manual. 

Assistance 

within

 the 90 Day Factory Direct Warranty 

Please contact Formax Directly for phone support during the first 90 days.  

Note: 

The 

90 day warranty begins when the machine ships from our factory. 

Phone Support:

 800-232-5535 Press “0” and ask for FD 1400 technical support. 

Hours:

 Monday - Friday 8AM- 5PM EST 

Depot Ship to Address: 

Formax 

44 Venture Dr 

Dover NH 03820 

*Machines cannot be shipped to Formax without an RMA#.  Shipments will not be accepted without an

 authorized Formax RMA#. 

Assistance

 after

 the 90 Day Factory Direct Warranty 

Please contact Intrepid service company for onsite nationwide service.  Intrepid of-

fers annual service agreements for your FD 1400 and per trip service at their hourly 

rate.  Formax strongly recommends that you purchase an annual service agreement 

which includes on-site repairs and preventative maintenance as well as rapid on-site 

response. 

Intrepid Contact Information: 

1-800-642-6015 

Hours:

 Monday - Friday 8AM- 5PM 

8

 

http://www.monomachines.com/

http://www.monomachines.com/

Summary of Contents for FD 1400










Reviews: