1.
Turn on the LED Laser Light.
2.
Raise the blade lever arm to the upright, locked posi
-
tion.
3.
Loosen the back gauge thumbscrew and slide the
back gauge forward or back to set it for the correct
paper length then re-tighten the thumbscrew. The
back gauge scale is marked for both standard and
metric measurements.
4.
Raise the front safety cover. Slide the paper stack
into the cutter along the left edge, using the align
-
ment bar for guidance. Push it as far back as pos
-
sible toward the back gauge, without placing hands
under the cutting blade.
Important Note:
When cutting pieces less than
2” insert the longer side of the document for safe
removal after cut.
5.
Lower the front safety cover.
6.
Move the clamping lever to the left to lower the
clamp and secure the paper in place.
OPERATION
5
