Feeder Area (1)
The system has a feeder block with two document feeders. The feeder block is equipped
with feeder swap. This means that you can link both feeders as pairs. When the first feeder
is empty, the system switches to the other feeder. Meanwhile you can refill the other empty
feeder without stopping the system. The front feeder (feeder 1) is equipped with a “daily
mail” function to process documents or sets of documents which cannot be processed
automatically (e.g. stapled).
Double Feed Control (DFC)
Each feeder has double feed control (DFC). In this way the system can detect faulty sets
of documents. When a job is started, the first document taken per feeder is used for a
reference measurement. When a document is exceeding that reference thickness an error
will be displayed.
When Daily mail is selected, the DFC is switched off automatically.
Envelope Hopper (2)
The envelopes are picked up and transported to the insert position inside the system.
Feeder for Business Reply Envelopes (BRE) and Other Enclosures (3)
Small enclosures or BREs are fed from feeder 3 and added to the folded document set.
Folding area (4)
In the folding area the documents are folded. The following fold types are possible (see
“Terminology” on page 29):
• No fold
• V-fold (single fold)
• C-fold (letter fold)
• Double V-fold (double parallel fold)
Inserter (5)
The folded document set is transported to the inserter unit and inserted into a waiting
envelope. The inserter can seal the envelope.
Exit (6)
The mail set leaves the system from the exit.
4
| Page 4 | Jan-15-2019 03:21 | Meet your Document System
2
English
