HD 20J14 Rev0.140718 7of 7
19. Insert a screw through each
‘L’- bracket
and into a clip.
20. Make sure all the components are well
seated together; the protector is centered
on the hood, and then tighten the screws
into the clips
.
21.
Repeat steps 16-20 for the outer holes.
CARE INSTRUCTIONS
Clean the protector with a mild soap
and water solution or plastic cleaner
only. Do not use chemicals or
solvents. Periodically check to make
sure the Bumpons are in place and
the protector is secure. Avoid using
automatic car washes. Do not pull on
the protector when opening or closing
the hood.
