forlong PM834 User Manual Download Page 8

上海奉义龙电子有限公司 

Shanghai Fengyilong Electronic Co,. Ltd.

                                                                     

 

___________________________________________________________________________________________ 

www.china-meters.com

     

Email

[email protected]

   

86

021-60975591/60975593 

-8-                                                                                                                                           

5      DEVICE DIMENSIONS 

 

                                               

6      SERVICE AND MAINTENANCE 

6.1 RECALIBRATION 

It should not be necessary to recalibrate the meter during its lifetime as it is an 
electronic meter with no moving parts and electronics, voltage and current sensors 
that do not naturally degrade or change with time under specified environmental 
conditions. If degradation in the accuracy is observed the meter has probably been 
partly  damaged  (for  example  due  to  lightning strike  or  extreme  environmental 
conditions etc) and should be sent for repair or exchanged. 

6.2 CLEANING 

If the meter is dirty and needs to be cleaned, use lightly moistened tissue with 
water based mild detergent. Make sure no liquid goes into the meter as this could 
damage the meter. 

 

 
7      SAFETY INSTRUCTIONS 

 

WARNING 

 

Maintenance  or  reparation  should  be  performed  by  qualified  personnel 
familiar with applicable codes and regulations. 

 

Use insulated tools to maintain or repair the meter. 

 

Make sure the protection cover is in place after maintenance or reparation. 

 

 

Summary of Contents for PM834










Reviews: