background image

 

 

FORK MEASURING COMPANY 

Vavdi Sr.No. 17, Plot No 55B, Rani Industrial Estate 

Gondal Road, Rajkot-360002 

 

INSTRUCTION MANUAL FOR DIGITAL INDICATOR (302-012) 

 

 

 

<Tol.>: in case the tol is present 

a)

 

Icon “TOL” is displayed on this mode. When the reading is within tol, icon “      “is displayed. 
When it is over upper tol “      “is displayed.”       “Is for smaller than lower tol 

 

                

 

b)

 

No zero setting on <Tol> mode 

c)

 

No ABS/INC switching on <Tol> mode 

 

 

<Max. / Min.>: The mode for memorizing and tracing Max. and Min. value

 

a)

 

Icon “MAX” is displayed on this mode. Now the Max. value will be memorized. 

b)

 

 Press button 

SET

 then “MIN” is displayed , now Min. value will be memorized. 

c)

 

Press button 

SET 

then “MAX - MIN” is displayed , it shows the margin between Max. and Min. 

value. 

d) 

 If pressing button 

ZERO/ON/OFF

 the memorized Max. and Min. value can be removed

 

 

e)

 

No ABS/INC switching on <Max./Min.> mode. 

f)

 

No ABS/INC switching on this mode. 

 

 

Function and Setting 

 

 

L-press button SET for setting, “SET” is displayed Then press button ZERO/ON/OFF it ' s switching within 4 
functions, , <Tolerance> “TOL” <preset> “CAL”, <metric/ inch> “ m-in “, and <measuring direction> “dir” 

 

 

Summary of Contents for 301-012

Page 1: ...LCD 8 MODE button 9 SET button 10 ZERO ON OFF button Features Ip56 protection level Absolute and relative measurement Metric and Inch conversion Origin data set tolerance set Measuring direction change with data output Automatic power off Stem Ø8mm as standard Temperature 10º 60º Working temperature 0 40º Technical Specification Code Range Reading Accuracy 302 012 0 12mm 0 0 5 0 001mm 0 00005 0 00...

Page 2: ... c Long press ZERO ON OFF button for power OFF Zero setting a Upon ABS mode press ZERO ON OFF Button for zero or preset value b It goes to zero when switching from ABS to INC mode c No zero setting at INC mode Switching mode between ABS and INC press button SET to change mode between ABS INC ABS displayed at ABS mode but no mode displayed at INC mode Replacing battery In case of below situations p...

Page 3: ...ing and tracing Max and Min value a Icon MAX is displayed on this mode Now the Max value will be memorized b Press button SET then MIN is displayed now Min value will be memorized c Press button SET then MAX MIN is displayed it shows the margin between Max and Min value d If pressing button ZERO ON OFF the memorized Max and Min value can be removed e No ABS INC switching on Max Min mode f No ABS I...

Page 4: ...ress button to set the present MODE value The last digit is blinking and can be modified from 0 to 9 by pressing button MODE b Press button ZERO ON OFF to blink the left digit finish the setting for all other digits per same procedure c Press button to SET quit The setting can be applied to both metric and inch mode d If L press button ZERO ON OFF the preset value goes back to zero and preset mode...

Reviews: