15
21
41
8
41
Large
Drawer
21. Insert the drawer with the Locking Drawer Face
(8) into the top two Drawer Slides (41).
Insert the remaining three drawers in the
same manner. Make sure the large drawer is
at the bottom.
22. Note: Do not remove the Table Top (46) from
the box yet.
Orient one of the Table Legs (45) as shown, so
the indicated slot is toward the back of the Table
Top (46) (there are holes along the back edge of
the Table Top). Make sure two Adjustable Feet
(49) are fully threaded into the Table Leg.
Attach the Table Leg (45) to the Table Top (46)
with eight 1/4” x 1 3/16” Lag Screws (60). Do not
tighten the Lag Screws yet.
Repeat this step with the other Table Leg (not
shown).
22
Work Bench
49
45
46
60
60
60
60
Slot
Back
Hole
Front
49
Summary of Contents for FDSS90030
Page 19: ...19 NOTES...
