Forge FDSS90030, User Manual

Page: 13 / 25

13
18. Attach the Small Drawer Front Panel (37) to the
tabs on the Side Panels (35, 36) of one of the
drawers with two #10 x 3/8” Machine Bolts (53)
and two #10 Nylon Locknuts (65).
Attach a Handle (18) and the Locking Drawer
Face (8) to the Small Drawer Front Panel (37)
with two 1/4” x 1 3/16” Machine Screws (54), two
Bushings (66), and two Handle Trims (25) as
shown.
Repeat this step for the other three drawers.
Note: Two of the drawers will have Small Drawer
Faces (39, not shown) and one drawer will have
a Large Drawer Face (40, not shown).
17. See drawing 17a. Orient a Small Drawer Front
Panel (37) at an angle as shown. Hold the Small
Drawer Front Panel under the indicated tabs on
the Side Panels (35, 36) of one of the drawers.
See drawing 17b. (Note: This drawing shows
the drawer from the back.) Press the indicated
tabs on the Small Drawer Front Panel (37) onto
the indicated lip on the Drawer Bottom (33). Make
sure the Small Drawer Front Panel is behind
the tabs on the Side Panels (35, 36).
Repeat this step for the other three drawers.
Note: One of the drawers will have a Large
Drawer Front Panel (38, not shown) instead of a
Small Drawer Front Panel (37).
17a
18
17b
37
35
36
37
36
35
33
54
53
53
36
35
37 65
66
66
65
8
25
25
18
Tab
Tab
Tabs
Lip
Tab
Tab
View from the back