FOREVER GO PROI JW-200, User Manual, Page: 4 / 258

4
EN
To activate the smartwatch without connecting it to the charger,
press and hold the touch button located below the display for 3 se-
conds.
Charging
Connect the device with the charging cable included in the kit. Make
sure that the device and cable connectors are connected to each other,
and then connect the USB cable to a power source.
After the charging process is complete, disconnect the smartwatch
from the charging cable and disconnect the cable from the power
source.
Turning the smartwatch on/off
Turning on: Press and hold the function button until the smartwatch
turns on.
Turning off: Press and hold the function button until the device turns
off. You can also go to the settings tab in the smartwatch menu and
select the „Disable” option marked with the following symbol , and
then confirm your choice.
„Forever GoFit” application installation
Find application called “Forever GoFit” in Google Play or App Store
and install it.
NOTE: The operating system of the phone must have the follo-
wing minimum specifications to run the application and support
the smartwatch: Android 5.0 or higher / iOS 10.0 or higher
Connect the smartwatch with the phone
1. Activate Bluetooth in your phone.
NOTE: To be able to use all functions of the application and
the smartwatch, during the first launching, allow the application
to access all required functions, and then also activate access to
notifications.
2. Activate “Forever GoFit” in the phone. Start using the application
as a “Guest” by clicking the upper right part of the screen or select
“Register” and follow the steps below: