FOREVER CAREME KW-400, Manual, Page: 6 / 8

10 11
DE
FR
IT
EE
GR
ES
PL
CZ
SK
RU
LT
BG
RO
HU
LV
EN
NL
DE
FR
IT
EE
GR
ES
PL
CZ
SK
RU
LT
BG
RO
HU
LV
EN
NL
ID: 1451498657; (ID must correspond to the number provided on the
plate included with the watch and on the bottom of the package)
imei:359614514986574;check whether IMEI is correct
ip_url: 52.28.132.157;check whether ip is correct
port:8001;check whether port is correct
center:;
slave:;
sos1:;
sos2:;
sos3:;
upload:600S;
bat level:96;
language:1;
zone:8.00;
GPS:NO(0);
GPRS:OK(73);
pw:123456;
Compare data included in the SMS with the watch number. If the ID
number is different from the number provided on the plate included
with the watch or on the bottom of the package, set new IMEI num-
ber. Send the following SMS from a phone to the number of the card
installed in the watch: pw,123456,imei,xxxxxxxxxxxxxxx# – after
receiving the SMS, the watch will respond with SMS including the cor-
rect IMEA number, for example: pw,123456,imei,359614514986574#
– Check whether the ID number matches the ID number of the watch
provided in the devices list in the application.
- You may not call the watch. The signal is busy or the subscriber
does not answer the call.
Reason:
The watch does not recognize the incoming number or the applica-
tion is set to “do not disturb” mode.
Solution:
– Check whether the number you are calling from is not restricted.
– Check whether there are contact numbers set in the application.
The watch only answers the calls from numbers that were previously
set in the application contacts.
- The application does not update location in real-time. It selects
LBS locations only
Reason:
GPS signal is too weak to locate the watch or the watch is in sleep mode.
Solution:
– Leave the building with the watch and press the “LOCATION” func-
tion in the “MAP” function.
– Remember that the application allows to set appropriate watch
operation mode. This is associated with the frequency of collecting
data, also those related to the location. In the energy-saving mode,
data is send once every hour. Therefore, to maintain full control of
the location in real-time, it is recommended to use normal mode,
which collects data every 10 minutes, or tracking mode, in which data
is collected every minute.
- The watch does not display current time and date
Reason:
The watch failed to connect with the application server in order to
update time.
Solution:
– Time may also be updated in connection with GPS location. It may
be checked by going outside and using GPS localizer function.
– If the watch is several hours behind, check and select appropriate
time zone via the application.
– If the aforementioned activities will not solve the problem, send
the following SMS from your phone (to the number of the SIM card
installed in the watch): pw,123456,ntpservers,121.40.88.40,8089#
The watch should respond with an SMS with similar contents. Then,
restart the watch.
– Additionally, you may also send a configuration SMS to the SIM
number in the watch with the following contents: pw,123456,ti-
me,hour.minute.second,date,year.month.day# – including, for exam -
ple, the current time pw,123456,time,09.50.00,date,2016.06.01#