FOREVER CAREME KW-400, Manual, Page: 3 / 8

4 5
DE
FR
IT
EE
GR
ES
PL
CZ
SK
RU
LT
BG
RO
HU
LV
EN
NL
DE
FR
IT
EE
GR
ES
PL
CZ
SK
RU
LT
BG
RO
HU
LV
EN
NL
Thank you for purchasing a product by Forever. Before use, please
refer to the User’s manual, and save it for future reference. Do not
disassemble the device on your own – all repairs should be done
by a service technician. Use only original parts and accessories
provided by the manufacturer. The device should not be exposed
directly to water, moisture, sunlight, fire or other heat sources. We
hope that the product by Forever fulfills your expectations.
Description
1. USB charging port
2. Touch screen
3. SIM card slot
4. Camera
5. On / off button
6. SOS button, torch
Specification
– Display: 1.4’’ 210x240 px
– Touch screen: yes
– Standby time: up to 3 days
– Charging time: 2 hours
– Strap length: 230 mm
– Battery: 400mAH
– Camera: yes
– Microphone and speaker: built-in
– Sim card: micro SIM
– Waterproofness: IP67
– Compatibility: Android 5.0 and later, iOS 8.0 and later
The set includes
– the watch
– charging cable
– instruction manual
Before using the kids watch, carefully read the instruction manual to en-
sure correct operation. Kids watch is a small telecommunication device,
used to locate its position and send data. Operation of the device is based
on GSM/GPRS mobile network and GPS satellites, as well as WiFi module.
IMPORTANT!
The device requires installation of a micro SIM card with active
service, allowing to make and receive calls, with no PIN lock. It is
recommended to deactivate voicemail. When sending information
regarding location, the watch will require access to mobile Inter-
net, therefore, you should buy at least 1 GB package. Use of the
watch may be associated with fees for using the network and calls,
in accordance with the operator’s tariff.
Charging
It is recommended to use a charger of output parameters of 5 V
DC, 500 mA. Charger is not included in the set. Full charging time
of the watch is approximately 2 hours.
Connect the included micro USB cable to the USB charging port
and then connect the other end of the cable to the power source
Preparation of the watch
- Open and tilt the micro SIM card slot protection, and then place
it in such a position that the sim card chip is facing up to the watch
screen, you will hear a click indicating correct installation.
- Always make sure the watch is turned off before inserting or re -
moving the SIM card. Never insert or remove the SIM card when
the watch is on.
- After properly installing the sim card, close the protection.
First launching
– After installation of the SIM card in the watch, and making sure that
the device is charged up, you may activate it by pressing and holding
the ON button, located on the right-hand side.
– Upon activation, the watch will connect with the mobile network
and obtain GPS and WiFi signals, if they are available.
Watch operation
The watch is operated using the touch screen. By moving your fin -
ger on the screen, you may switch between particular functions;
you select functions by pressing the screen.