Attached Garden Pergola www.foreverredwood.com
Step 3.
Attach the flat supports to the posts with
2 bolts (6” x 3/8”) washers & nuts per post. (Match
numbers) and attach the other end of the supports to the metal plaques (the plaques must be already anchored
to the leger board). Tap the bolt all the way into the wood to set it, and then add a washer and nut and lightly
tighten.
Step 4.
Attach the mini posts to these supports with 2
bolts (6” x 3/8”) washers & nuts.
Step 5.
Attach the main dual supports to the posts and mini posts with 2 bolts
(6” x 3/8”) washers & nuts per
connection. This beam must be in the interior of the support and bolted after you attach the supports to posts as
shown below: