Attached Garden Pergola www.foreverredwood.com
2
Metal Anchors
to attach
supports to
ledger board
2
Post anchors
Depending
on size
Hardware:
Bolts and deck
screws
Deck Screws Bolts, washers and nuts
ASSEMBLY INSTRUCTIONS
All Pergolas and Pavilions are completely erected in the shop prior to be crating for shipping. All hardware is
included. All parts are fully sanded, routed, notched, drilled and numbered for ease of reassembly. The parts
that go together have the same numbers/letters written next to the predrilled holes they attach to.
All parts are notched into the part they connect to. You'll find the numbers next to the notches and/or drill holes.
Before beginning re-assembly, place the parts that go together on the ground with one another so you don't
have to be searching around in the middle of the reassembly. Most pergolas take less than one day to
reassemble with one helper. Very large pergolas (6 posts or larger) usually require a second day to finish up.
Note:
print the drawings that you approved before start the construction, they are needed to see the distances
between the posts.
Step 1
.
Attach your anchor kit to the ground.
STEP 1: Place the anchor where it will be installed;
mark the ground as shown and drill 2 holes as shown
1/4" wide hole 4" deep
STEP 2:
Ratch down the anchor bolts
(½” x 4”). Then
take off the nut before you place the metal anchor (note:
for wood deck use lag bolt)