ADIRONDACK CHAIN GLIDERS
www.ForeverRedwood.com
P| 5
Step 3:
Use 3/8” X 7” bolts
(A)
to attach the diagonal supports
(4)
to the legs and to the supports. Tap the bolt all the way into
the wood to set it. Then add a washer and nut and lightly tighten. Each part has a series of numbers that indicate where to attach
the part with the corresponding number
Step 4:
Attach the Armrests
(5)
to the Seat
(6)
, with 5/16” x 3 ½ bolts
(D)
, washers & nuts. Tap the bolts all the way into the
wood to set it. Then add a washer and nut and lightly tighten. Each part has a series of numbers that indicate where to attach the
part with the corresponding number.
5
5
6
5/16´´ X 3 ½´´ Bolts
3/8´´ X 7´´ Bolts
4
4