ADIRONDACK CHAIN GLIDERS
www.ForeverRedwood.com
P| 4
Step 1:
Attach the legs
(2)
to the supports
(1)
, with 3/8” X 7” bolts
(A)
. Tap the bolt all the way into the wood to set it. Then add
a washer and nut and lightly tighten. Each part has a series of numbers that indicate where to attach the part with the corresponding
number
Step 2:
Attach the base legs
(3)
to the legs with 5/16” X 5 ½” bolts
(B)
and 3/8” X 8” Bolts
(C)
. Tap the bolt all the way into the
wood to set it. Then add a washer and nut and lightly tighten. Each part has a series of numbers that indicate where to attach the
part with the corresponding number
3/8´´ X 7´´ Bolts
2
2
1
3/8´´ X 8´´ Bolts
5/16´´ X 5 ½´´ Bolts
3
3