6
REMOTE CONTROL OPERATION
COOLING
• Based on set temperature, the air conditioner’s microcomputer controls the cooling
system (compressor) to maintain room temperature. If the room temperature is higher
than the set temperature, the compressor resumes and the air conditioner runs in
cooling mode. If the room temperature is lower than the set temperature, the compressor
stops and only the inside unit fan will run.
4. SETTING THE FAN SPEED
Press on
FAN
and set the
speed. Each level is
paired with a matching icon.
5. OSCILLATION
Press on
SWING
to
start the automatic
oscillation of the louvers.
Press again to cancel.
3. SET THE
TEMPERATURE
Press on to set the
temperature. Increase or
decrease the degrees by
The temperature can be
set from 16°C to 30°C
(61°F to 86°F). The
temperature cannot be
changed in AUTO mode.
1.
Press
ON/OFF
to turn air
conditioner on.
2. SETTING THE
COOLING MODE
Press on
MODE
until
the
COOLING
icon
shows on.
MODE
ON / OFF
O
PERATIONS ARE NUMBERED IN ORDER OF
STEPS TO FOLLOW
.
