16
Unit working temperature range: Do not operate unit if outside temperature is below
18°C or above 43°C or you could damage the compressor and void the warranty.
Use copper supply wires.
Caution mount with the lowest moving parts at least 2.4 m above floor or grade level.
Warning: risk of electric shock can cause injury or death. Disconnect all remote elec-
tric power supplies before servicing.
During connection of the pipes, if great torque is imposed on flare nuts, service valve
on narrow pipe may be damaged. When tightening flare nuts or narrow pipe, torque
should be adjusted between 13.7~18.6N.M (140~190KGF.CM).
Do not put this unit in wet place.
Fragile, handle with care.
Electrical installation must be in accordance with local electrical codes.
The installation of these units requires qualified personnel.
Certified (approved) type supply conductors must be used.
An independent branch circuit must be used.
Maximum inter connecting conductors length should not exceed 11 m (444.875”).
Refrigerating pipe lenght must be limited between 4 ~10 m (157.484” ~ 393.75”).
If the length exceeds 7.62 m (300”), the cooling capacity may become impaired.
Difference in height between indoor and outdoor unit should not exceed 7 m
(275.594”).
WARNING
TECHNICAL SPECIFICATIONS
GSW18-22L/A
(OUTDOOR UNIT)
INDOOR UNIT
GSW18-22L/A
(OUTDOOR UNIT)
OUTDOOR UNIT
COOLING CAPACITY
12,000 BTU/H
VOLTAGE
~115V
FREQUENCY/PHASE
60 HZ
TOTAL INPUT CURRENT
(Cooling)
9.6 A
COMPRESSOR
RLA
8.8 A
LRA
46 A
FAN MOTOR
OUTDOOR
0.42 A
INDOOR
0.17 A
DESIGN PRESSURE (High)
2.5 mpa
DESIGN PRESSURE (Low)
1.0 mpa
SOUND PRESSURE
55 dbA
MINI CIRCUITAMPERAGE
15 A
REFRIGERANT (R-22)
1,250 g
COOLING CAPACITY
12,000 BTU/H
VOLTAGE
~115V
FREQUENCY/PHASE
60 HZ
DESIGN PRESSURE (High)
2.5 mpa
DESIGN PRESSURE (Low)
1.0 mpa
TOTAL INPUT CURRENT
9.56 A
REFRIGERANT(R-22)
1,250 g
SOUND PRESSURE
46 dbA
Unit size (WxHxD)
Indoor: 90.7 x 19.5 x 29 cm (35-3/4’’ x 7-5/8’’ x 11-3/8’’)
Weight: 12 kg (26.5 lbs.)
Outdoor: 84.8 x 54 x 32 cm (32-3/8’’ x 21-1/4’’ x 11-5/8’’)
Weight: 40 kg (88.2 lbs.)
Suction connection size: 1/2’’
Liquid connection size: 1/4’’
