MLR52 2 Stroke
7
Running
1. After the engine starts, run for 3~5 minutes at a low speed.
2. When the engine is warmed up, adjust the throttle according to the
required speed.
CAUTION:
Don’t accelerate abruptly due to lack of lubrication of the engine
at the beginning of startup.
Avoid high idle speed and over speed. If the throttle is totally opened, the
engine will over speed, which not only shortens the service life of the engine
but also causes more problems in the engine.
Stopping The Engine
1. Reduce the engine to the slowest speed and run for 3-5 minutes.
2. Press the stop switch located either on the equipment or below the
pullstart, to stop the engine.
Summary of Contents for MLR52
