Forest Master Model: FM6DD-MUL/FM6DDES-MUL/FM4DDE-MUL
6
• If the machine starts to make an unusual noise or vibrate, shut down the engine,
disconnect the spark plug wire (FM6DD-MUL) or plug socket (FM4DDE-MUL),
wait 5 minutes for the engine or motor to cool down, then inspect for damage.
Vibration is generally a warning of trouble. Check damaged parts and clean,
repair and/or replace as necessary.
• If the machine topples over during operation, immediately turn off the engine or
motor and for the FM4DDE-MUL model, disconnect the power cable.
• When using the FM4DDE-MUL, always use on a circuit that has an RCD to prevent
the chance of an electric shock.
Safety with Maintenance
• Inspection and maintenance must be done with the motor and driving unit
switched off and the spark plug cap removed (FM6DD-MUL) or power cable
(FM4DDE-MUL) disconnected. Wait 5 minutes for the engine or motor to cool
down.
• Any worn or damaged parts must be replaced, to ensure that the mulcher
is maintained and in a safe state. Only use Forest Master spare parts for
replacements. Contact us to arrange.
• Never use the mulcher with damaged or worn cables.
• Never, under any conditions, remove, bend, cut, fit, weld or otherwise
alter standard parts on the mulcher. This includes all shields and guards.
Modifications to your machine could cause personal injuries and property
damage and will invalidate your warranty.
• Never use a pressure washer or running water to clean the engine or motor. This
might lead to water ingress in the engine or the bearings (invalid warranty). Do
not use any aggressive cleaning products. The inside of the feed and discharge
chutes and drum can be cleaned with a pressure washer.
• Never transport the mulcher with the motor still running.
• Prior to transport, use appropriate fixing materials to fasten the mulcher to the
fixing points on the load surface.
• Prior to storing the machine, make sure that it has been restored to a sufficient
state (i.e. clean and free from debris). Apply oil to the knives, the knife drum
and the bearings to protect them from corrosion. This is especially the case for
storage during long periods of inactivity of the appliance.
• Store the machine in a dry, closed room, out of children’s reach.
Safety
