Once you have the chain correctly around the wheel, place the chain wheel cover plate back
onto the machine, remember to ensure you align the tensioning pin to the receiving hole
(Fig. 10), this can be done by adjusting the tensioning pin (Fig. 11) clock-wise to tighten and
counter clock-wise to loosen
Fig. 11
Fig. 10
Once aligned place the cover plate back on to the machine and tighten the cover plate
handle by pushing in while rotating clock-wise until there is a slight gap (Fig. 12) this will
allow you to tension the chain correctly.
Fig. 12
- 6 -
