Bulk Log Stand 2
9
Operation
STEP 4:
Begin cutting the logs by
sawing the overhanging
ends to the required
length of log then saw
down between the two
U-Supports.
If the overhanging ends
need to be cut into multiple
logs then cut alternately
from each end in order to
keep the weight over the
centre of the stand.
STEP 3:
Take a log securing chain (1)
and place one loop over each
of the telescopic uprights of
a U-Support. Note that the
flat part of the loop to which
the chain is attached should
be angled downwards.
Allow the chain to slide
down the uprights so it rests
on the logs.
Repeat for the second
securing chain on the other
U-Support.
1
3
2
