Bulk Log Stand 2
11
Safety
IMPORTANT SAFETY INFORMATION
Before using the log stand always check that all nuts and
bolts are secure and that the log stand is not damaged.
Use the log stand on firm level ground only. Do not use on
sloping or uneven ground.
After securing the logs in the log stand, check the stability
and balance before starting to cut. The log stand must not be
able to tilt.
Read and observe the operating instructions of the chainsaw
you are using and wear all recommended safety gear. Always
wear safety shoes or boots in case a log is accidentally
dropped on your feet.
Only cut with the bottom of the chainsaw bar as the log
may otherwise shift away from the rotating chain, become
unstable and increase the risk of personal injury.
Clear and stack the sawn logs away from the log stand to
keep the work area clear of obstructions and safety hazards.
IMPORTANT:
Check that the logs are secure and the log
stand is stable before beginning to cut.
WARNING:
Do not exceed the specified maximum total log
weight as given on page 2 of this manual.
