7
Issue 0414
E
P
Place the magnetic catch against the
inside of the door frame but opposite the
magnetic plate on the reverse of the door.
Fix this in place using 2 x 25mm screws.
Place the hinges against the door so that they are in line with the
battens on the reverse and secure using 3 x 25mm (black) screws.
Place the door into the door frame and fix the other side of the
hinge using 4 x 25mm (black) screws for each.
Attention :
When positioning the door the gap between the door and the frame on the hinged side
must be no less than 12mm. The gap on the opening side must be less than 5mm.
5
Place the handle half way up the door against the
edge of the board. Position the magnetic plate on the
reverse of the door opposite the handle. Use 2 x
25mm screws to fix both the plate and handle to the
door screwing from inside.
6
Place the door block against
the front and in line with the
side of the door end. Making
sure that this is in line with the
top of the door fix using 2 x
50mm screws.
Insert a piece of the
glazing in to the frame
and fix it in place,
pinning a glazing strip
on each side as shown.
Use 2 x panel pins for
each strip.
G
GH
F
P
Forest Garden Ltd, Unit 288 Hartlebury Trading Estate, Hartlebury, Worcestershire, DY10 4JB