www.forestgarden.co.uk
For further information
IMPORTANT, RETAIN FOR FUTURE REFERENCE: READ CAREFULLY.
Check all parts are present prior to assembly.
- Always pre-drill timber to avoid splitting.
- The timber in this product is pressure treated to ensure longevity and protection against
rot. This may leave a colour variations,
but these will even out as the moisture content stabilises.
- Timber is a natural material and will shrink and swell as a result of varying moisture
content.
- Keep all plastic bags and parts away from children.
Technical Help line: 0333 7777 089 8:30am - 5.00pm Monday to Friday
In line with your statutory rights, please check all parts prior to assembly, as assembly of
damaged parts may be deemed to be acceptance and this may affect the remedies you
are entitled to. If the product is not constructed in accordance with the instructions, or is
altered in anyway (e.g. painted), the manufacturer cannot be held liable for any resulting
damage.
Slot Down Composter
REQUIRED TOOLS: (NOT SUPPLIED)
MUST PRE DRILL
(FIXING PACK) FSSCV2FP
NOT TO SCALE
PARTS:
75751198SPTR (POST) QTY 4
137160
912PTR (BOARD) QTY 24
50mm
Qty 28
B
A
Spirit Level
Drill/Pozi Drive
Screwdriver
Tape Measure
This article contains biocidal products to give protection against wood destroying insects
& wood rotting fungi. Contents may vary.
May contain : Basic copper carbonate (Copper (II) carbonate – Copper (II) hydroxide
(1:1), Cupric oxide, Copper hydroxide carbonate, oxyethyl, ammoniumpropionate, Copper
HDO, Propiconazole, Tebuconazole, Boric acid, Benzalkonium chloride.
Wear gloves when handling freshly treated wood. Avoid breathing dust when cutting
treated or untreated wood. Dispose of off-cuts responsibly – do not burn.
Forest Garden Ltd, Unit 288 Hartlebury Trading Estate, Hartlebury, Worcestershire, Dy10 4JB
1
876
238
A
375
B
2
3
Position the posts in a square formation as shown and sink 375mm into the ground.
Slot the first row of boards into the framing. Secure 3 of the boards using the 50mm screws, 2
at each end of each board. The one board you do not secure will be your access to the
compost so position it in an accessible orientation.
1. Slot the remainder of the boards into position.
2. Secure all 4 of the top boards using 2x50mm screws at each end of each board.
To retrieve the compost loosen the top screws and slide the boards up.
ISSUE 0117
