3
VE02ALT
/VE05ALT
LED:
Blue (front panel): power on/off
RJ45 LED (Link cable connector):
Green:
status (Refer the below)
Yellow:
status (Refer the below)
LED status indication:
CH1 ~ CH4
Green on/off: VGA Signal
Green flash
：
EDID checksum error
Yellow on: use monitor DDC
Yellow off
：
use built in DDC
Yellow flash: monitor EDID checksum Error
Yellow, Green, Blue all flash
：
Memory error
VE02ALT/VE05ALT local unit EDID set up:
Setup Monitor EDID: When Yellow LED off, press “SETTING” button until Blue LED flash,
then release the “SETTTING” button, yellow LED will be on.
Setup Built in EDID
：
When Yellow LED on, press “SETTING” button until Blue LED flash,
then release the “SETTTING” button, yellow LED will be off.
Reset factory default: First to unplug the power, then press “SETTTING” button until
reconnect power and Blue LED flash.
Auto Backup EDID
：
Change new monitor
，
it will start the monitor EDID backup.
VE02ALR Remote unit adjustment:
EQ
equalization
(sharpness)
Gain
signal
boost
(brightness)
VE02ALR LED:
Blue (front panel): power on/off
RJ45 LED (Link cable connector):
Green: signal lock
(LED on )
Caution:
The cabling must away from any equipment with electromagnetic wave, i.e.: microwave,
radio equipment, high voltage lines.
FORESIGHT CCTV INC. | 5863 Leslie Street, Unit#713, North York, Ontario,Canada, M2H 1J8 | http://www.foresight-cctv.com | 1-888-GO2-CCTV
