16
DVD OPERATION
1. BASIC PLAY DVD OPERATION
1. Press TV/DVD button on the remote controller or DVD button on the TV set to
turn on (or off) DVD.
2. Press OPEN / CLOSE button to load disc into disc tray.
Hold the disc without touching either of its surfaces, position it with the printed title
side facing up, align it with the guides, and place it in its proper position.
3. Press OPEN / CLOSE button to close the tray.
2. DVD SETUP MODE
Setup Mode provides the menu for the configuration of General Setup Page,
Speaker Setup Page, Dolby Digital Setup, Video Setup Page and Preference Page.
Item selection in the Setup Menu is done by using the Navigation Arrows, SETUP
button and the OK
button.
·
Press the SETUP button first , enter into SETUP menu, then press the
DIRECTION RIGHT button,
you can enter into the next Sub-menu.
·
Press the SETUP button again to exit the Setup Menu.
1. General Setup
TV Display
·
PS
This is selected when the DVD player is connected to a
normal
TV. Wide-screen images are shown on the screen, but
with some parts
cut automatically.
·
LB
This is selected when the player is connected to a normal TV.
Wide-screen images are shown on the screen, with black belt
on the top and bottom.
·
Wide
This is selected when the player
is connected to a wide-screen TV.
Angle Mark
This only works when there is an angle mark on the disc.
Select ON, the screen shows the mark when playing
DVD.
·
ON
·
OFF
OSD Language
This is used to select the OSD language.
