INDUSTRIAL GAS ANALYZER FD-311
FORENSICS DETECTORS
TM
FORENSICS DETECTORS
TM
www.forensicsdetectors.com
4
PRODUCT FEATURES
•
32bit microprocessor, color display, and built-in-pump
•
Rugged industrial design and build
•
ABS and rubber housing, explosion proof
•
Rechargeable Lithium-ion battery via easy USB charger
•
Professional Hard Case
•
Built-in pump and easy barb hose connector
1. INTRODUCTION
You have purchased the FD-311
INDUSTRIAL GAS DETECTOR by FORENSICS
DETECTORS
TM
.
The detector is factory calibrated, TURN ON AND GO! This
product is an INDUSTRIAL gas analyzer made with a robust ABS design using a
high-quality thermal conductivity sensor. This detector is made for industrial use
for engineering professionals, technicians, contractors, energy inspectors,
researchers, and labs.
2. QUICK SETUP
1.
Ensure all components are included.
2.
Ensure analyzer is fully charged. If not, please charge the battery first.
3.
Double check all tubing is well connected and in place. Check all connections.
4.
Turn ON the detector. After countdown and self-check the pump turns ON
and READY to use when the instantaneous gas concentration is shown.
5.
Start measuring. Real-time measurements are shown on the HOME screen.
6.
Read this manual and familiarize yourself with the operation.
7.
Always be safe.
8.
Before turning OFF, flush/purge the air out the detector by allowing the pump
to run for 60 secs to allow fresh air to purge the instrument.
9.
Ensure tubing and items are clean before storing as to avoid any
contamination, residual odors or toxic gases that may poison the sensor.
