www.forenex.com.tw
- 12 -
6.
Remote Configuration over Web page
6.1)
The first time to configure E2S board
There are two methods to connect between E2S board and Host PC for first time setting.
Due to the static IP of E2S board has default at 192.168.0.3, therefore, make sure the IP
address of host PC sets as same segment as 192.168.0.xxx.
(xxx is between 1 and 254, except 3).
a.
PC connects to E2S board directly.
b.
The E2S board connects to LAN.
6.2) Authentication page.
Open a web browser and enter
http://192.168.0.3
. When the login window appears,
set the user name to
admin
and set the password to
admin
.
Click
Login
to continue.
Figure 8. Authentication page.
