3
Figure 2
Remove all protective material carefully. Avoid cutting
the surface of the furniture while removing the packag-
ing material.
Remove the Bolt (C), Metal Plate (D), flat washers (E),
lock washers (F) and nuts (G) from the spring late for
chair seat (A).
Place the chair seat (A) on a non-abrasive flat surface.
Align the holes on the support bar on the underside of
the chair seat with the holes on the spring plates at-
tached to the t-rocker that is pre-attached to the chair
base (B). Make sure the arrow labels on the rocker
mechanism and chair support bar are facing the same
direction—towards the front of the chair. Insert bolts
(C) through the metal plates (D), support bar, spring
plate and the metal plates (D) as showed in the dia-
gram. Secure bolts with flat washers (E), lock washers
(F) and nuts (G). The support bar and spring plate
should be sandwiched in between the metal plates (D).
Warning: Improper assembly may result in serious
personal injury.
Once all the nuts and bolts are in place, securely
tighten all the bolts (C) and nuts (G), including the
ones at the front part on the rocker mechanism with
the wrench (H). Cover all bolts with bolts caps (I).
(FIGURE 1)
1
Spring
plate
Place the seat cushion (J) on the rocking chair.
Test the swivel rocker gently. If the rocker does not rock
properly, double check the assembly procedure, espe-
cially step 1.
REPEAT ABOVE STEPS TO ASSEMBLE THE
OTHER ROCKING CHAIR.
(FIGURE 2)
Your chair is now ready for enjoyment.
2
B
A
J
Figure 1
I
Support
