6
ASSEMBLY INSTRUCTIONS
NOTE: Tool Required for Assembly: phillips screw driver ( NOT included)
NOTE:
DO NOT tighten bolts completely.
1. Carefully unpack all parts from the box, compare parts with package content listed above, make sure all
parts are present before beginning assembly of product. If any part is missing or damaged, do not attempt
to assemble the product. Contact customer service for replacement parts.
2. Attach left panel (K) to front-left leg (J) and back-left leg (M) with bolts (AA) and washers (BB) using hex
screwdriver (CC), (see Figure 2).
4. Attach right panel (E) to front-right Leg (F) and back-right leg (D) with bolt (AA) and washer (BB) using the
hex screw driver (CC), (see Figure 4).
NOTE:
DO NOT tighten the screws completely.
Hardware Used:
AA Bolt (M6 x 15) x 4
BB Washer (M6) x 4
CC Hex screw driver x 1
Figure 2
NOTE:
DO NOT tighten the screws completely.
3. Attach back panel (C) to back-left leg (M) and back-right leg (D) with bolts (AA) and washers (BB) using hex
screw driver (CC), (see Figure 3).
Hardware Used:
AA Bolt (M6 x 15) x 4
BB Washer (M6) x 4
CC Hex screw driver x 1
CC
AA
BB
CC
AA
BB
Figure 3
J
K
M
M
D
C
