Be sure the On/Off Power Switch on back lights up when you are ready to work.
The switch on the
back must be in the ON position for the handpiece to run in any setting.
Always turn the Dial to ‘0’ and On/Off Switch to the Off position when not in use.
FORWARD/REVERSE MODE:
With the Speed Dial at ‘0’, select the handpiece rotation /
direction by pressing the FWD/REV Mode Indicator: FWD = Forward or REV = Reverse.
•
Speed Range: 500 – 50,000 RPMs
HAND/FOOT MODE:
With the Speed Dial at ‘0’, select either Hand or Foot Mode for
speed control.
• When the Hand indicator lights up, the handpiece will run at the speed set by the
Speed Dial.
• Briefly
press the Run Selector to activate the handpiece in Hand Mode. The RUN
light will be on.
The RUN light will also light up in Foot Mode when you press the
Foot Control.
• When the Foot Mode indicator lights up,
the handpiece will only operate when the Foot Control
is pressed.
You can set a maximum speed with the Speed Dial, but range of speed will be
controlled by the Foot Control.
REGULATING SPEED:
Use the Speed Dial to vary the speed of the handpiece from
minimum to maximum when the Hand Indicator lights up.
RUN SELECTOR:
The 1040 has two speed range choices.
•
5K
: 0.5k (500rpm) - 5k (5,000rpm)
•
50K:
0.5k (500rpm) - 50k (50,000rpm)
To choose your speed range:
• When the
5K light is OFF
the speed mode is 50K:
0.5k (500rpm) - 50k (50,000rpm).
• To select 5K mode PRESS AND HOLD THE RUN SELECTOR button until the 5k light turns ON.
When the light is on the unit is set to 5k:
0.5k (500rpm) - 5k (5,000rpm)
OPERATING INSTRUCTIONS
Hold To
Change
Press To Run
Hold To
Change
Press To Run
Hold To
Change
Press To Run
HANDPIECE HOLDER:
The control box has T-shaped Slots
for placing the handpiece holder in a location and angle
for your convenience. The flexible vinyl covers on the
T-shaped slots can be pried out with a screwdriver with a
very thin blade.
DIGITAL SPEED DISPLAY:
Displays the current rate of speed x1000rpm
For example, when the display is showing
“.5” the speed is 500rpm.
“1” the speed is 1000rpm
“25” the speed is 25,000rpm
“50” the speed is 50,000rpm
