Ford Windstar, Owner'S Manual

Page: 56 / 385

Electronic Sound Systems
55
*
[AS10060(ALL)03/96]
■
Using the “TUNE” function
*
[AS10070(ALL)03/96]
You can change the frequency up or down one increment at
a time (FM changes in increments of 200 kHz; AM changes
in increments of 10 kHz) by first pressing the
“SCAN/TUNE” button twice (display shows “TUNE”), then
— within approximately five seconds —pressing and
releasing either the right
a
or left
b
side of the “SEEK”
button. To change frequencies quickly, press and hold down
either the right or left side of the “SEEK” button.
*
[AS10080(ALL)03/96]
Manual tuning adjusts your radio to any allowable broadcast
frequency, whether or not a station is present on that
frequency. (See All About Radio Frequencies in this section.)
*
[AS10090(ALL)04/96]
■
Using the “SEEK” function
[AS10100(ALL)07/96]
This feature on your radio allows you to automatically select
listenable stations up or down the frequency band. Press the
right
a
side of the “SEEK” button to select the next
listenable station up the frequency band. Press the left
b
side of the button to select the next listenable station down
the frequency band. By holding the button down, listenable
stations can be passed over to reach the desired station.
*
[AS10120(ALL)04/96]
■
Using the “SCAN” function
*
[AS10130(ALL)03/96]
Pressing the “SCAN/TUNE” button once enters the scan
mode (display will indicate “SCN”). Pushing the right
a
side of the “SEEK” button will begin the scan mode up the
frequency band, stopping on each listenable station for
approximately a five-second sampling. Pushing the left
b
side of the “SEEK” button will begin the scan mode down
the frequency band, again stopping on each listenable station
for approximately a five-second sampling.
*
[AS10150(ALL)03/96]
To stop the scan mode on the presently sampled station,
press the “SCAN/TUNE” button again.
File:04wnass.ex
Update:Mon Jul 8 14:13:42 1996