Controls
12
Tailboard
The tailboard is manufactured from tough lightweight extruded aluminium,
secured by two latches per side locking the tailboard to the rear corner pillars.
Loads exerting force on the Tailboard could cause injury if not
removed prior to opening the board.
WARNING
To open the Tailboard:
Remove sheeting if load is sheeted, visually check the load is not exerting force
on the Tailboard.
Push against the top of the Tailboard with one hand. With the other hand release
one latch by pulling the handle up to approximately 90° from the vertical,
continue pushing the handle up until almost vertical and the latch is released.
Repeat the operation for the other latch whilst supporting the Tailboard. Then
lower it carefully. Do not drop the Tailboard or damage may possibly result.
Tailboard closed and latched
Tailboard unlatched ready to open
Transit Dropside 2014:11-12 Seat Transit 28/11/14 10:52 Page 15