Ford TOURNEO CONNECT, Owner'S Manual, Page: 305 / 437

Fuses in the engine compartment
Please refer to and at the start
of the chapter on page 300.
Fig. 181 In the engine compartment: fuse
box with plastic grippers.
1
Fuse box.
2
Plastic pliers.
Opening and closing the fuse box in the
engine compartment
1. Open the bonnet.
2. Press the locking button in the direction
of the arrow
→
Fig. 181 (arrows) in order
to unlock the cover of the fuse
box
→
Fig. 181
1
.
3. Lift off the cover.
4. To install, position the cover on the fuse
box and press it downwards until the
cover audibly clicks into place on both
sides.
There may be a pair of plastic grippers for
removing fuses in the fuse box
→
Fig. 181
2
.
Fuse table for fuses in the engine
compartment
Please refer to and at the start
of the chapter on page 300.
Fig. 182 In the engine compartment: fuse lo-
cations.
The table shows the fuse locations of the
electrical equipment relevant for the driver.
The
first column in the table contains the
location. The other columns contain the
fuse designs, the amp rating and the con-
sumer protected by the fuse.
Depending on the market and
specification
of your vehicle, the fuse numbers and loca-
tions may
differ to those given in the table.
If necessary, ask an authorised dealer for
the exact fuse layout.
Fuse location
→ Fig. 182 :
15 amps, ATO ® , horn.
30 amps, ATO
®
, front wipers.
7.5 amps, ATO ® , brake light sensor.
F9
F10
F31
Changing fuses 303
2KF012
720AB