Ford Taurus 2004 Owner'S Manual Download Page 20

Page: 20 / 248

Fade:

Press

to shift

sound to the rear/front speakers.

Scan:

Press to hear a brief

sampling of all listenable radio
stations or CD tracks. Press again to
stop.

CD:

Press to play a CD. Press

again to toggle between single CD
mode and CD Changer mode (if
equipped).

Shuffle:

Press to play CD tracks

in random order.

COMP (compression):

Press to

bring soft and loud passages
together for a more consistent
listening level.

10.

FF (fast forward):

Press and

hold until desired selection is
reached.

11.

REW (rewind):

Press and hold

until desired selection is reached.

12.

Memory preset buttons:

set a station: Select frequency band
AM/FM; tune to a station, press and
hold a preset button until sound returns.

13.

Tune:

Press

to change

radio frequency down/up. With CD
changer (if equipped), press to
select the previous/next CD.

14.

Seek:

Press and

release

for previous/next

listenable radio station or
previous/next CD track.

FADE

2004 Taurus

(tau)

Owners Guide (post-2002-fmt)
USA English

(fus)

Entertainment Systems

Summary of Contents for Taurus 2004

























































































































































































































































Search results

Summary of Contents for Taurus 2004

Reviews:

Related manuals for Taurus 2004

Brands by name

Popular brands

Ford Taurus 2004, Owner'S Manual

Search results

Summary of Contents for Taurus 2004

Reviews:

Related manuals for Taurus 2004

Brands by name

Popular brands