7
Turning on the Rear-Window Defroster (if connected):
While the vehicle is running via remote start, press
on the remote control. The
system will flash the parking lights to confirm and activate the vehicle’s rear defroster
for 10 minutes, or for the remainder of your vehicle’s preset runtime time limit.
Using the “Quick-stop” Feature:
If you want to make a short stop and leave your vehicle running (to keep the interior
warm or cool, for instance), the quick stop feature allows you to do this while keeping
your vehicle secure and your keys with you.
To engage quick stop:
1. Stop the vehicle and place the transmission in PARK.
2. With your foot off the brake pedal, press
on the remote control. The parking
lights will turn on and the doors will unlock, indicating that the vehicle is now
running via remote start.
3. Remove the keys from the ignition and exit the vehicle. Press
to arm the alarm
system if desired.
Note: Do not leave children or animals unattended in the vehicle when using the
quick stop feature.
Service/Valet Mode:
Service mode is used when servicing the vehicle to prevent the system from
unexpectedly starting the engine while being serviced. While in service mode, the
systems keyless entry functions will operate normally, but the remote start function is
temporarily disabled.
To engage the service mode, turn the ignition key to the ON or RUN position and
press the
and
buttons together on the PowerCode remote control transmitter.
The system will begin flashing the dash mounted status indicator in a double-flash
pattern indicating that the system is in Service mode.
To return the system to its normal operating mode, turn the ignition key to the ON
or RUN position and press the
and
buttons on the PowerCode remote control
transmitter again. The status indicator will shut off, indicating that the system is in now
in its normal operating mode.
Important Note: When taking your vehicle in for service it recommended that you
inform the service personnel that your vehicle is equipped with a remote control start
system.
Using the Remote Control Start Function (Con’t)
