5
Illuminated Entry and Exit
When the doors are unlocked using the PowerCode remote control, the vehicle’s
courtesy lights will turn on for 1 minute, or until the vehicle is started or the system is
re-armed.
When the ignition is turned off, the vehicle courtesy lights will turn on for 1 minute, or
until the system is armed.
Memory Seats:
If your vehicle is equipped with memory seats and/or functions, the memory functions
will be activated when you unlock the doors using the PowerCode remote control
transmitter in the same manner as with the factory equipped RKE keyfob.
Power Side Sliding Doors (Windstar only):
On Windstars equipped the Power Side Sliding doors, the driver side power sliding
door is controlled by pressing the
and
buttons together on the PowerCode
remote control transmitter. The passenger side power sliding door is controlled by
pressing the
and
buttons on the PowerCode remote control transmitter.
Prior to activating the power sliding door with the PowerCode remote control, all doors
must be unlocked. Pressing the two buttons together the first time will open the
selected door. Then pressing the two buttons together again will close the selected
door.
Power Rear Liftgate Operation (Expedition and Navigator only):
On Expeditions and Navigators equipped the Power Rear Liftgate option, the power
liftgate is controlled by pressing the
and
buttons together on the PowerCode
remote control transmitter.
Pressing the
and
buttons together the first time will open the power liftgate,
then pressing the
and
buttons together time will close the power liftgate.
Express Window Down (LS only):
Press and holding the
and
buttons together will activate the Express Window
Down function. Release the
and
buttons when window have gone down to
desired point or hold both buttons until the windows are all the way down.
Power Tonneau Cover Operation (Blackwood only):
On Blackwood, the power tonneau cover is opened by press and holding the
and
buttons together on the PowerCode remote control transmitter. The power tonneau
cover is closed by press and holding the
and
buttons together on the
PowerCode remote control transmitter.
Remote Control Operation (Con’t)
