POWER ADJUSTABLE FOOT PEDALS
The accelerator and brake pedal
should only be adjusted when the
vehicle is stopped and the gearshift
lever is in the P (Park) position.
Press and hold the rocker control to
adjust accelerator and brake pedal.
•
Press the bottom of the control to
adjust the pedals toward you.
•
Press the top of the control to
adjust the pedals away from you.
The adjustment allows for approximately 3 inches (76 mm) of maximum
travel.
Never adjust the accelerator and brake pedal with feet on the
pedals while the vehicle is moving.
POWER DEPLOYABLE RUNNING BOARDS (IF EQUIPPED)
Deployable running boards (DRB) automatically move when the doors
are opened to assist entering and exiting the vehicle.
Automatic power deploy:
•
The running boards will extend
out when the doors are opened.
Automatic power stow:
•
The running boards will return to
the stowed position when the
doors are closed.
Manual power deploy:
To manually operate the running
boards, refer to the
Message Center
in this chapter.
•
This feature can manually set the running boards in the deployed
position for access to the roof.
•
When running boards are manually set in the deployed or stowed
position, they will move back to the automatic position when the
vehicle speed is greater than 5 mph (7 km).
REVIEW COPY
2005 Navigator
(nav)
, Owners Guide (post-2002-fmt)
(own2002)
,
Market:
USA_English
(fus)
Driver Controls
150
Summary of Contents for Navigator2005
Page 440: ...440 ...
Page 840: ...400 ...
