manualshive.com logo in svg

Ford MUSTANG MACH 1 2021, Supplement Manual, Page: 38 / 84

Share
Download
Ford MUSTANG MACH 1 2021 Supplement Manual Download Page 38

BREAKING-IN

Your vehicle requires a break-in period. For
the first 1,000 mi (1,600 km), avoid driving
at high speeds, heavy braking, aggressive
shifting or using your vehicle to tow. During
this time, your vehicle may exhibit some
unusual driving characteristics.

Ground Clearance

Since ground clearance is reduced, use
caution when approaching curbs or curb
stops from the front and rear as vehicle
damage may occur. Additionally, when
crossing speed bumps or driveway curbs,
you should approach at a 45 degree angle
to reduce the risk of vehicle damage.

DRIVING THROUGH WATER

Your vehicle has aerodynamic devices
attached to the underbody designed to
help control airflow for superior
performance. Therefore, the driver must
be especially careful to avoid driving
through deep or standing water. If driving
through deep or standing water is
unavoidable, do not exceed 10 mph
(16 km/h). Never drive through water that
is higher than the bottom of the wheel
rims. Water may enter through the air
intake due to the vacuum generated in the
engine. Your vehicle warranty does not
cover damage caused by the intake of
water into the engine.

35

Mustang (CZG) Mach 1, enUSA, First-Printing

Driving Hints

Summary of Contents for MUSTANG MACH 1 2021





















































































Reviews:

No comments