Initiating Line Lock
The initiation stage verifies that the vehicle
is ready for line lock function, and confirms
driver intent. Follow the prompts in the
information display to initiate line lock.
The following conditions must be met to
initialize line lock:
•
The vehicle is on a level surface.
•
The engine is running.
•
The vehicle is traveling less than
25 mph (40 km/h).
•
Selectable drive mode is not in wet
mode (if equipped).
•
There are no electronic stability control
faults.
If you want to cancel line lock once it is
initialized, press the left information
display control. Once initiated, line lock is
prepared for activation and remains
initiated up to 25 mph (40 km/h). If vehicle
speed exceeds 25 mph (40 km/h), line lock
automatically cancels.
Engaging Line Lock
Follow the prompts in the information
display to engage line lock after it is
initialized. To engage, firmly apply the
brakes. Then press the OK button. Once
engaged, release the brake pedal. The
front brakes remain applied and the rear
brakes release. At this point, the
engagement timer is initiated and shown
on the driver information display.
The following conditions must be met to
engage line lock:
•
The vehicle is on a level surface.
•
The engine is running.
•
The vehicle is stopped.
•
The parking brake is not applied.
•
The driver door is closed.
•
The transmission is in a forward gear.
•
Selectable drive mode is not in wet
mode (if equipped).
•
There are no electronic stability control
faults.
•
The steering wheel must be in the
straight ahead position.
Releasing Line Lock
While line lock is engaged, you can exit
(release) the feature using the OK button.
When you press the OK button, line lock
releases immediately and normal vehicle
function resumes. When line lock engages,
a countdown timer shows the remaining
time before line lock is released
automatically. If you exceed the time limit,
or another vehicle condition requires line
lock to release, the system safely
disengages and normal vehicle function
resumes.
Note:
If you apply the brake pedal while
line lock is engaged, line lock automatically
cancels and normal brake function resumes.
Performance Shift Indicator
The performance shift indicator displays
a row of colored lights that represent
engine RPM.
The performance shift indicator menu
allows you to:
•
Choose whether the indicator is shown
on the windshield or information
display.
•
Set a shift point within the allowable
RPM range in increments of 100.
•
Enable or disable the associated shift
tone, based on the set shift point.
•
Set the between off, change with drive
mode, tach, track and drag.
•
Set the light intensity. The intensity
adjusts between day time and night
time.
45
Mustang (CZG) Mach 1, enUSA, First-Printing
Track Use
Summary of Contents for MUSTANG MACH 1 2021
Page 3: ......
